PAX Era Pod Battery
PAX ERA Battery for use with PAX ERA Pods. This lightweight, discreet pod battery has a sleek finish and powerful battery. Fine tune the heat settings via the PAX app (bluetooth) for the perfect draw. Experience uniform heating throughout the oil within the PAX ERA pods (sold separately).
- Color: Onyx (Black)
- Battery Capacity: 240mAh (up to 200 puffs per charge)
- Connection: For use with PAX ERA Pods only (not included)
- Charging: Rechargeable (Micro USB charger included)
- Charge Time: 45 minutes +
- Size: 3.3" H x .72" W x .40" D
- Activation: Breath activated
- Heat Settings: 4+
- Heat Time: Instant
- Bluetooth App: 10' Range
LED Indicators
Standby Mode: Lights on the PAX ERA will dim after 10 seconds of inactivity. Simply take a draw from the device at any time to use. There is no button for on/off.
Low Battery: All LED "petals" (indicator lights) blink red 3 times, then the device powers down.
Charging: There are four LED "petals" (indicator lights) on the PAX ERA device which provide insight on the activity of the battery. Below are the indications for charging..
- While charging, each LED "petal" glows to indicate 25% increments of battery charge.
- A pulsing white "petal" indicates the current level of charge.
- Solid white petal indicates that charge level is complete.
- All four LED's solid white means the PAX ERA is fully charged.
Pod Detected: When using an authentic PAX ERA Pod, the LED "petals" (indicator lights) will react when the pod is inserted or removed.
- Pod Inserted: White LED's sweep downward.
- Pod Removed: Blue LED's sweep upward.
Temp Set Mode: In Temp Set Mode each LED indicates a temperature selection by the number and color of petals displayed. One green LED indicates the Low default temperature setting. Two yellow LED's indicate the Medium-Low default temperature setting. Three orange LED's indicate the Medium-High setting. Four red LED's indicate the High default temperature setting.
To enter Temp Set Mode, first shake the device then remove the ERA Pod. Once the pod is removed the LED will start by displaying your current selection, then the petals will slowly begin to cycle through the remaining temperature settings. Reinsert the pod when you see your desired setting indicated. Once you've selected your temperature, ERA will confirm back by pulsing the selection's matching LED indication.
If you've set a custom temperature through the app, it will be displayed on the LEDs between the High default temperature setting and the Low default temperature setting.
Tip: It's not necessary to fully remove the pod from the device to enter Temp Set Mode. You may find raising the pod from the device slightly is helpful.
Session Usage: Depending on how much control over your experience you prefer, there are times you may want to meter your session usage as you become more familiar with PAX ERA. An individual session is measured through a series of consecutive petal indications.
To check your current session usage, give PAX ERA a double tap with your finger. As you progress through your session more petals light up and change color, first, cycling through 4 green LEDs, then blue LEDs followed by red LEDs before returning to green.
Tip: Usage meters may vary from one person to another and from pod to pod. You'll learn how to read the petals as relative measurements for your sessions. Session usage metering will reset to zero 30 minutes after your last puff or if manually reset.
FREE SHIPPING ON ORDERS OVER $49.99
Add $50.00 or more worth of products to your cart to get Free Shipping